What Lawn Bowls Equipment Do I Need for My Bowling Green?

There are some basic lawn bowls accessories you will require to get your bowlers up and running.  Some of the key considerations when selecting your lawn bowls accessories are quality and safety.  
All too often products can be made out of steel which will rust overtime in our hot humid climatic conditions in Australia.  it is important that you look for aluminium and stainless steel materials and fixtures.  
Any printing should be on high quality, coated PVC.  You can contact Bowling Green Supplies about your needs whether you are replacing certain items or looking for a full starter pack for a new installation.  
The safety of the bowlers and spectators is paramount so any fixtures for the bowling rinks and around the bowling green should be designed to ensure that any accidental trips are minimised (e.g. that the fixtures move with the bowler and do not remain rigid).  
This can be achieved by way of spring mounted or ditch mounting the fixtures required for marking and numbers your lawn bowls rinks.  Bowling Green Supplies can provide advice and quotes on what suits your requirements best.

Lawn Bowls Equipment and Accessories

• ​Your bowling green will require one lawn bowls scoreboard for each rink.
• If your Club plays bowls both ways then you will require a scoreboard for each end and side of the bowling green
• Stainless steel spring mounted rink numbers, pictured, ensure that there is no trip hazard
• Stainless steel spring mounted boundary markers (400m or 600mm) ensure no bowler tripping and are clearly visible.  You need two per rink and two for the sides (e.g. a four rink installation requires 10 boundary markers)
• Ditch mounted lawn bowls rink numbers and boundary markers are also available
• 2 & 23 metre markers and ditched jack and ditched bowl markers are required
• Lawn bowls rubber mats with your choice of advertising are needed at both ends of the rinks
• A heavier jack for synthetic surfaces is required

---